SZN-1202 Xenon Lamp is a super power and smart performance flash lamp for intelligent traffic system. Under dark environment, it provides high power fill flash and helps intelligent traffic camera to capture clear and colorful picture of number plate and human face in the vehicle. It has easy operated function of manual brightness adjustment to get proper light effect. With excellent performance, convenient installation and long life time, this product is superior in the market.
|Capture Picture-1||Capture Picture-2|
1.Easily adjust light brightness in the field.
2.High output of instantaneous light power with uniformity of light spot.
3.Longer life time than normal flash lamp.
4.Instant relighting, assure continuously multiple flash per second.
5.Suitable in variety of working environment.
7.Colorful picture available.
One port capture trigger input
Power per flash
more than 5million times
Support to continuously capture 2 pictures per time
Reflective Bowl Angle
1. SZN-1202 xenon lamp has power cable and control signal cable.
2. Power cable wiring definition.
Color of outgoing wire
Must be ground for safety
3. Control cable wiring definition.
Color of outgoing wire
Signal & Function
Falling edge effectively
Connect orange and white wire to get 95% power
Connect orange, white and yellow wire to get 90% power
Connect orange and green wire to get 85% power
Connect orange, white, yellow and green wire to get 80% power
Warning: Cut off the outer copper of unused wires and wrap them with electrical insulation type to avoid power reduce from short circuit.
The principle diagram of interface
Connection between camera and flash lamp
Matters need attention
In order to get better performance of lamp, please pay attention to below:
1.Reflection of number plate may cause overexposure, please install the lamp in proper position and adjust the multiple exposures setting of camera to avoid this situation.
2.Camera shutter speed has influence to image effect at day and night, please make proper setting on it. Suggested setting is 1/100~1/250 or AUTO.
3.Lens aperture is a key factor affecting the imaging, please have a proper adjustment in field. The bigger F-rate the lower light flux, the smaller F-rate the higher light flux.
4.The power wire should connect to ground wire, otherwise may cause electrical shock.
5.The lamp contents high voltage power supply which is strictly prohibited to open, otherwise it may cause electrical shock.
6.In case that the lamp is overheated the circuit will stop working and after temperature down it will turn to work again.
7.Wires can't be tighten in case of waterproof purpose.
After sales service
1.In case that product damaged except artificial reason and the force majeure, we offer 5million flash times guaranteed of tube and 24 months warranty of control circuit, lifetime maintenance with cost price.
2.We keen to ensure the accuracy and completeness of content, but due to limited time we couldn't complete tests of all application area, any mistake are expected to be corrected.
3.We reserve the right to product design or material change.
Scene Electronics is one of the best China Xenon Lamp manufacturers and suppliers, with professional factory, we are able to produce cheap 300w xenon lamp with reliable quality. Welcome to buy or wholesale products from us.