Instruction of IR Strobe Camera Housing S-HZ33S-A-IR
• Smart uniform irradiation solution improves image quality & monitoring effect.
• Leading IR technology provides high efficiency and long life span of LED
• Accurate constant circuit drive develops excellent performance of product
• Power and day/night switch manually controlled
• Fill light for night vision camera
• Indoor/outdoor use, all-weather use.
• High integrated solution for easy installation and saving cost
• Support camera video synchronization by strobe control
|Quantity of LED|
10 PCS 2W High Power IR LED
Day/ night Switch
CDS 10-20lux ± 10% (adjustable)
Support Hikvision/ Dahua strobe control
Input Voltage AC110V-220V
Panel Tempered glass panel
Aluminum Die Casting Housing
Bottom mount bracket
-40 ℃ to +60℃(-50℃ to +60 ℃ with heater)
Cooling Air cooling internal circulation
Packing Dimension 490*235*185mm
Material: Aluminium Alloy
(1). The product includes fragile parts. Take care on every transportation steps and hold carefully, do not stress!
(2). Ensure operating voltage and current are proper before installation.
(3). Install the product on the holder by fixing the mount hold with screws directly.
(4). Adjust the angle of product by loosing screws on bracket.
(5). Link power wires tightly and make it waterproof to avoid electric shock.
(6). Connect with extra power wire should make it waterproof at the same.
(7). The outlet of power wire should be installed downward.
(8). Don't use against any fire precaution rules during operation.
(9). Installation requested professional operation and qualified personnel.
(10). Connect our sales person if you need additional parts for installation.
1. Cut off power before maintenance.
2. Clean the glass regular to get better transmission of light.
3.Clean the housing to get well heat dissipation performance.
4. Clean by dry dishcloth, don't use water or strong corrosive solution.
Night vision pictures
Night time with IR Camera Housing Night time without IR Camera Housing
a:190mm b:132mm c:445mm d:20mm
5. Models for selection
|Model||Beam Angle||IR Distance(850nm)|
*IR distance is tested by SONY 1/3" CCD Camera.
To achieve the distance needed, please pay attention to your camera specification and lens before purchase. It is normal phenomenon that distance may vary due to different cameras and lens.
Scene Electronics is one of the best China ITS Camera Housing manufacturers and suppliers, with professional factory, we are able to produce cheap its camera housing strobe control s-hz33s-a-ir with reliable quality. Welcome to buy or wholesale products from us.