• Deliver high power infrared light for CCTV & IP camera at night time and
improve performance of camera to get clear pictures.
• 50,000 hours lifetime of LED.
• 3 years warranty.
• IK10 approved.
• IK10 degree of protection against mechanical impacts.
• Two stages of constant current circuit avoid LED away from instantly impulse impact when started.
• 50% design margin and accurate constant current circuit drive not only develop excellent performance of LED but maintain whole product a super long life of 10 years.
• Low failure rate of products is guaranteed by the professional in-house optimized independent circuit technology, which has been widely used in the illuminators for more than 5 years.
• Twice direct cooling heat sink processing enable to increase the cooling coefficient and prolong the service life of the product.
• Patent design hexagonal spherical light sensor more accurately responses ambient brightness and
improves accuracy of automatic light control.
• Flexible angle-adjustable bracket can extend the illuminance range widely.
• Robust cooling fin design is available the illuminator working at -40℃ to 50℃.
• Super energy saving circuit with low electrical power consumption.
• Super power dot-matrix IR LED with strong light effect, long service life and low light decline feature.
• High efficient twice optical lens processing achieves 90% of the luminous efficiency.
• The housing adopts high thermal conductivity aluminum to enhance heat dispersion property.
• Stainless steel bracket and screw ensure low maintenance.
Wide Range of Application
• Recommended for security at ports, railway systems, border, prisons, traffic LRP/ANPR, ITS as well as
large public places surveillance.
•To improve performance of the weak light camera and enhancing the picture effects at night
•Conventional night monitoring
•The function of video analysis at night
•Reduce signal noise and other image distortion
•Reduce the network bandwidth requirements
•Energy saving by power factor correction
•Reduce the equipment cost
•Lower cost of installing and wiring
Viewing Picture at Night
With IR Without IR
Technical Specification Drawing
LED type 24pcs 2W dot-matrix IR LED
Voltage DC12V 4A
Power consumption 45W (850nm)
Day and night switch Auto/dry contact
Cable length 0.45meter
Mounting Wall mounting “U” bracket
Temperature -40℃ to 50℃
Grade of protection IP66
Panel High light transmittance toughened glass
Net weight 2.1kg
Gross weight 2.5kg
Packing dimension 290*250*170mm
Model for selection
Model Beam angle IR distance(850nm)
S-H24EK-10-IR 10° 260m*
S-H24EK-15-IR 15° 200m*
S-H24EK-30-IR 30° 150m*
S-H24EK-45-IR 45° 90m*
S-H24EK-60-IR 60° 70m*
S-H24EK-90-IR 90° 60m*
S-H24EK-120-IR 120° 50m*
*IR distance is tested by Sony 1/3 CCD Camera.
To achieve the distance needed, please pay attention to your camera specification and lens before purchase. It is normal phenomenon that distance may vary due to different cameras and lens.
Scene Electronics is one of the best China IK10 Vandal Resistant IR Illuminator manufacturers and suppliers, with professional factory, we are able to produce cheap s-h24ek-ir ik10 vandal resistant with reliable quality. Welcome to buy or wholesale products from us.