Please strictly follow the below instructions when install this product!
• Accurate constant circuit drive develops excellent performance of LED; Using high power LED, high efficacy and long service life;
• Fill light for night vision camera
• Indoor/outdoor use
• Easy installation
|Quantity of LED||8PCS 2W High Power LED|
|Color Temperature||Cool white, warm white|
|Beam angle||15°- 90°|
|Day/night switch||CDS 10-20lux ±10%|
|Wire||If 12VDC/24VAC:45cm(1.4 ft.)|
|Plug||AC110-220Vstandard), other voltage optional|
|Panel||Tempered glass panel|
|Housing||Aluminum Die Casting Housing|
|Working temperatures||-20℃ to +50℃(-50℃ to +50℃ with heater)|
|Bracket (options)||Material: Aluminium Alloy|
1. The product includes fragile parts. Take care on every transportation steps and hold carefully, do not stress!
2. Ensure operating voltage and current are proper before installation.
3. Install the product on the holder by fixing the mount hold with screws directly.
4. Adjust the angle of product by loosing screws on bracket.
5. Link power wires tightly and make it waterproof to avoid electric shock.
6. Connect with extra power wire should make it waterproof at the same.
7. The outlet of power wire should be installed downward.
8. Don't use against any fire precaution rules during operation.
9. Installation requested professional operation and qualified personnel.
10. Connect our sales person if you need additional parts for installation.
1. Cut off power before maintenance.
2. Clean the glass regular to get better transmission of light.
3. Clean the housing to get well heat dissipation performance.
4. Clean by dry dishcloth, don't use water or strong corrosive solution.
Night vision pictures
|Night time with white light||Night time without white light|
4. Installation and adjustment
(1). Internal Picture
Put on the camera on the telescoping bracket, adjust the height of camera and fix it.
①BNC Video Signal Wire: Connect to the video signal wire of camera
② Power Wire: Connect to the power of camera
③ BNC Video Signal Wire: Connect to the monitor.
④ Power Plug: Connect to power source.
(3). Dimension of inside camera
①Adjust the current of LED PCB, increase current by turn clockwise and decrease by counter clockwise. Increase the current, the power of LED will increase too.
② Turn counter clockwise to increase the sensitive of CDR sensor.
6. Models for selection
|Model||Beam Angle||White Light Distance|
|* White light distance is tested by SONY 1/3" CCD Camera. |
To achieve the distance needed, please pay attention to your camera specification and lens before purchase. It is normal phenomenon that distance may vary due to different cameras and lens.
|Our product is weatherproof and dustproof. Do not modify the shape, dismantle or reconfigure the product, any inflow of water cause by which are not be responsible for warranty repair.|
Scene Electronics is one of the best China White Light Camera Housing manufacturers and suppliers, with professional factory, we are able to produce cheap night vision housing s-sd8-w with reliable quality. Welcome to buy or wholesale products from us.